Contact Us

<<< Back to the last product or page you were viewing

Aftercare For Venetian Blinds

Look after your Venetian blinds by following the straightforward operating instructions below:

Operating

• The cord on the Venetian operates the height of the blind.

• The wand operates the angle of the slats.

• To raise the blind pull the cord down until the blind reaches your desired height, pull the cord away from the face of the blind to lock it into position.

• To lower the blind pull the cord across the face of the blind to release the cordlock and let the cord slide gently through your fingers.

• To adjust the angle of the slats, twist the wand until they are at the desired angle.

• When raising and lowering, the blinds slats should be in the open position.

• Please note: Venetians do not close totally - it is the nature of the product.

Cleaning

• Your Venetians simply need to be dusted.

• Use a dry duster, a damp cloth or vacuum cleaner with a wall-cleaning attachment.

• Care should be taken not to bend the slats while cleaning.

• If your blind becomes very dirty, use a damp cloth with clean water. Dry thoroughly.

• We do not recommend using any soap or detergent!

• Anti-Static cleaning cloths are suitable. 

WARNING: In the interest of safety, it is advisable to keep all pull cords and chain/bead cords out of the reach of children

---