Outside Recess (Refer to the diagram below)

If fitting the blind outside the window, measurements (C) will need to be the same. To work out (C), simply minus (B) from (A) and divide the answer by two. Follow instructions for FACE FIXING.

Inside Recess (Refer to the above diagram)

Decide whether to FACE FIX or TOP FIX.

FACE FIX to fix the bracket to the window frame. TOP FIX to the lintel if the window is uPVC, or if there are any obstructions, e.g. window handles.

Step Two

 View from above

Place blind in fitting position and tilt forward to show ladder controls. When fitting the brackets, you will need to have at least 5cm either side of controls.

Use cord control A to raise and lower the blind. The wand control B turns to adjust the slat angle. 

   Fitting Instructions Continued

Sales  
01323 501755

General Enquiries 
01323 501556

Fax
01323 501755